It may be possible to upgrade your Apple LaserWriter if you have a partially
dead LaserWriter Plus.
|Printer and Photocopier Troubleshooting and Repair Collection : Upgrading Apple LaserWriter to LaserWrit..
1994-2007, Samuel M. Goldwasser. All Rights Reserved. Reproduction of this document in whole or in part is permitted if both of the following conditions are satisfied: 1. This notice is included in its entirety at the beginning. 2. There is no charge except to cover the costs of copying.
I may be contacted via the Sci.Electronics.Repair FAQ (www.repairfaq.org) Email Links Page.
<< Diagnosing a blank vertic.. |
| Toner All Over Paper on V.. >>
(From: Ralph Wade Phillips" (firstname.lastname@example.org).)
There are two ways. One is to swap the eight or sixteen ROMS from the Plus
into the same sockets on the LaserWriter, !AND! to swap the programming shunt
assembly ( a set of four jumpers in a 16 or 24 pin DIP socket), placing it in
the exact SAME place. The easier way, if you have both printers, would be to
remove the upper cage and swap THAT. This will mess up the page count,
however, that's not such a big deal nowadays (not on a CX engine - after all,
does it REALLY matter on a '88 Dodge Aries K that it's got 213K miles or 127K
miles? ... )